Skip to content
Sun Software logo with the tagline Engineering Beyond Code
Plumbing & Industrial Fittings Suppliers

Industrial website design that lets a plumber order the exact fitting from the van.

A 1/2 inch elbow and a 3/4 inch elbow look the same in a photo. Your buyer needs the right size, thread and material, the price before VAT and a clear answer on stock. Industrial website design has to start there, so we build the trade store that gives them all of that on a phone. We built one for MSJ Fittings, a plumbing and industrial fittings supplier in the United Kingdom.

What the research says

Your buyers already look for parts online. They still want the counter.

Surveys of UK plumbers and heating installers, and of industrial distributors, show how the trade finds parts today and what makes an online store pay its way.

  • of 500 UK heating and plumbing installers surveyed use online platforms to identify and source boiler spares

    60%+

    What we do

    We set up store search that understands a part number, a size or a thread type, and test it on a phone.

  • of the engineers in the same survey said fast access to parts matters more now than in previous years

    84%

    What we do

    We show on each product if it is available, so your buyer knows before they order or drive over.

  • of UK plumbers buy online at least occasionally, while around 70% still buy in branch

    80%+

    What we do

    We launch the store beside your counter and phone, and move a first group of trade customers over before the rest.

  • of industrial distributors whose store is fully linked to their business system were highly satisfied with its return, against 35% with a limited link

    71%

    What we do

    We check during planning whether your stock or counter system can share stock levels, and tell you plainly if it cannot.

The problem

Where does a fittings order go wrong?

Your range is thousands of parts that differ by a size, a thread or a finish. Your buyers know what they need, and they are often standing next to the pipe when they order. You may recognise some of these.

01

Each size of the same elbow is a separate product, so a category runs to pages of near-identical listings

02

A buyer types a part number or "3/4 BSP nipple" into search and gets nothing useful back

03

Trade buyers want the price before VAT, DIY buyers want it included, and the store shows only one

04

The wrong thread or material gets ordered, and the return costs more than the fitting

05

The counter phone rings all morning with "have you got twenty of these on the shelf?"

06

Data sheets, pressure ratings and dimensions sit in manufacturer PDFs that never reached the product page

One plan, several services

Who does what on your fittings store?

A fittings buyer searches for a part, checks the size and the price before VAT, looks at stock and orders. Catalogue, pricing, stock and search each need different skills. We plan them together, and each part of our team takes the piece it knows best.

  1. 1

    Web, Ecommerce & Digital Platforms

    Your store, product families with size and thread options, trade accounts and both VAT views.

  2. 2

    AI Agents & Business Automation

    Stock levels from your counter or stock system, and an assistant that answers from your data sheets.

  3. 3

    Custom Software & SaaS Development

    A product data import, a quote tool for project lists or a pricing rule your store platform cannot handle.

  4. 4

    SEO, AI Visibility & Digital Growth

    Departments, part numbers and sizes set up so an engineer searching for one fitting lands on it.

First conversation

What we ask before we propose anything

Three questions show us how your range is organised and where a buyer could pick the wrong part.

01

How many products do you list, and how many are the same fitting in another size, thread or material?

02

When a trade buyer searches your site for a part number today, what do they get?

03

Where are your stock levels and trade prices kept, and can that system share them?

How it works

How your fittings store project runs

A fittings store is only as good as its product data. So we start with your range and your part numbers, and leave the design until the catalogue makes sense.

  1. 01

    Go through your range

    We take your product list, price file and supplier data, and note which parts are really one fitting in several sizes, threads or materials.

    What you get

    A map of your range, family by family.

  2. 02

    Agree how a part is described

    We agree the options for each family, how part numbers are written and which departments match how the trade asks for things.

    What you get

    One naming and options scheme for the whole catalogue.

  3. 03

    Set prices, VAT and stock

    We set up trade accounts, quantity breaks and both VAT views, and check whether your stock or counter system can share stock levels.

    What you get

    Price rules in writing and a clear answer on stock.

  4. 04

    Build it, then search like a plumber

    We build on a private test copy, then search for real parts by code, size and trade name on a phone, and place test orders as trade and DIY buyers.

    What you get

    A working store with search and prices checked.

  5. 05

    Launch beside the counter

    We train your team to add fittings and change prices. The phone and the counter keep taking orders while a first group of trade customers tries the store.

    What you get

    A live store your team can run.

What you get

What changes for your business?

What your buyers and your counter staff should notice. Exactly what you get depends on what we agree to build.

What we show as proof

These come from how the trade stores we built work day to day. On MSJ Fittings, every size is an option on one product page, prices show with and without VAT, and stock is shown before a buyer orders. We have not published sales or time-saved figures for it. Where a benefit has not been measured, we call it intended, not proven.

  • The right size, first time. Size, thread and material are chosen on one page, with the part number shown for the option picked.

  • A price each buyer can trust. Trade buyers see prices before VAT and DIY buyers see them with VAT. We test both before launch.

  • Parts found by search. A buyer who knows the code, the size or the trade name reaches the product without browsing departments.

  • Fewer stock calls to the counter. Each product shows if it is available before anyone orders it.

  • A catalogue your team can keep up. A new size is one more option on a page your staff already know how to edit.

Public cases

Two public cases from the merchant trade

Both were reported by the trade press. Neither business is our client. Each one shows something we plan for.

  • Company results · 2025

    A UK merchant's delivered sales fell after a system change

    What happened

    Travis Perkins, a UK builders' merchant, brought in a new Oracle business system in 2024. Insight DIY reported from its half-year results that direct-to-customer sales fell 11% in the first half of 2025, and that the trouble began after the switch. Sales through the yard returned to growth in the second quarter. The company pointed to more staff training and a cleared invoice backlog as progress.

    What we do about it

    We launch your store beside the counter and the phone, not in place of them. We place test orders as trade and DIY buyers on a private copy first, and train your team before customers arrive.

    Source: Insight DIY
  • Trade press report · 2026

    A pipe, valve and fittings distributor put its branch on a phone

    What happened

    F.W. Webb, a US distributor of plumbing, heating, pipe, valves and fittings with more than 100 locations, launched a mobile app on 31 March 2026. Digital Commerce 360 reported that it shows stock and each customer's pricing, with spec sheets and installation guides on the product. A company executive said it was meant to serve customers at the jobsite, in the office or on the road.

    What we do about it

    You do not need an app to do the same job. We build the store for a phone first, with part search, stock and data sheets on the product page.

    Source: Digital Commerce 360
FAQ

Questions from fittings suppliers

What makes industrial website design different from a normal online store?

The product data. Trade buyers search by part number, size and thread, want the price before VAT and need data sheets on the product page. So we sort your catalogue first and design the store around it.

We have thousands of fittings. Do you load them one by one?

No. We agree the product families and options with you first, then import from your price file or supplier data in bulk. Messy or missing data is the usual hold-up, so we look at your files before we quote.

Can one product page cover size, thread and material together?

Usually, yes. On MSJ Fittings each fitting is one product with its sizes as options. Where a family has too many combinations for one page to stay clear, we split it by material or thread and link the pages.

Can the store show prices with and without VAT?

Yes. We built that for MSJ Fittings, with a switch on the store. You tell us which VAT rules apply to your products and customers, and we set the store up to show prices the way you specify.

Can it show live stock from our counter system?

It depends on whether that system offers a way to connect, and what it allows. We check during planning. If it cannot connect, we agree another way to keep stock in step, such as a scheduled file, and tell you its limits.

Should a fittings store be on WooCommerce or Shopify?

MSJ Fittings runs on WooCommerce inside a WordPress site, which gives full control over pricing rules, content and product data. Shopify can suit a simpler range. We recommend one after seeing your catalogue and price rules.

  1. 1Review My Fittings Store
  2. 2We reply within one business day
  3. 3Discovery call
  4. 4Step one: Go through your range

Show us one product family and how a buyer finds it today.

Send us one product family, such as your malleable elbows or your ball valves, and tell us how buyers order it today. We'll show you how it could look on one page and what your stock system would need to share.

  • The first conversation is free
  • NDA before you share anything
  • A reply within one business day